Honda HRR216VLA 21 inch 160cc Push Lawn Mower


  • Brand: Honda
  • Product Code: JPE-0775581
  • Availability: In Stock

Tags: Walk Behinds

Features for the Honda HRR216VLA

 Honda GCV160 Engine:160cc Honda engine starts easily, runs reliably, and provides the power you need. Designed for fuel efficiency and meets EPA and CARB 50 state emission standards.

  • Easy Fold Handle:Easily adjust the position of the handle for maximize comfort during operation. Fold the handle over for storage or transportation.
  • Height Adjustment:Set the height to 6 different positions with a convenient height adjustment lever to suit the needs of your lawn.
  • Flywheel Brake System:The engine shuts off quickly when the flywheel brake lever is released.
  • Large 8'' Wheels:Provide a smooth ride and excellent maneuverability on rough terrain. Made to last.
  • Steel Mowing Deck:Constructed with rugged steel for high durability. A cutting width of 21 inches will make quick work of your lawn.
  • Honda Auto Choke System:No choke required to start the engine. Easily starts and is ready to go with a turn of the key.
  • Adjustable Smart Drive:Adjust the speed between 0 and 4 mph to match your walking pace. The control has 5 adjustable positions for optimal comfort.
  • 3 in 1 Cutting Methods:Switch between mulching, bagging, and discharging by sliding the Clip Director. No need for tools or attachments.
  • Honda MicroCut Twin Blades:Four cutting surfaces create very fine clippings for excellent mulching results. Empty the bag less and enjoy a finer cut in the end.

Technical Specs for the Honda HRR216VLA

Engine : GCV160
Displacement(cc) : 160cc
Power : 4.4 HP
Torque : 6.9 lb-ft
Starting System : Recoil/electric
Fuel Capacity : .98 qts
Oil Capacity : 0.58 qt

Engine Specification
Cylinder Bore : 2.5''
Cylinder Stroke : 2.0''
Compression Ratio : 8.5:1
Carburetor : Horizontal type butterfly valve
Ignition System : Transistorized magneto
Air Filter Type : Dry (paper)
Lubricant Type : Splash

Cutting Deck
Cutting Deck Material : Steel, 16 ga
Cutting Width : 21''
Cutting Height (min-max) : 1 1/8 - 4''
Cutting Height Steps : 6
Blades : Twin blades (MicroCut System)

Drive System
Drive Type : Variable Position Smart Drive
Transmission Type : Variable Speed Fixed Gear Belt Clutch
Speed : 0 to 4.0 mph

Handle Type : 1'' Steel Tube

Weight (lbs.) : 92 lbs.

Residential Warranty : 3 years
Commercial Warranty : 90 days

Write a review

Note: HTML is not translated!
    Bad           Good